MESA Carbine M9 Bass Amp Repair

Here’s some photos from an emergency repair I did for the band Swans.

I got phone call from their tech saying that one of their amps. a MESA Carbine M9, had died with smoke emanating from the innards.

Swans needed the amp turned around quickly as they were on tour. I said that this didn’t look promising but I would have a look at it; smoke is usually a bad sign, and if say the output transistors had died it’s unlikely that I would have the correct parts in to affect a repair.

Anyhow, when I got the amp the source of smoke was fairly obvious:

MesaCarbine2

 

This an insulation displacement connector (IDC) which connects the power transformer secondary windings to a PCB. IDC connectors rely on blades in the connector to pierce the insulation in the connecting wire.

IDC connectors are generally used to aid assembly/ disassembly. However you can experience problems with IDC when passing high currents eg in a 600W amp! Other manufactures have had problems with IDC connectors for the filament supply in valve amps, eg Bugera in their 333XL.

Anyhow, the I removed the connector and soldered the wires directly to the PCB and we were up and running again.

MesaCarbine1

This entry was posted in Amp repair, Bass Amps, Guitar Amps, London. Bookmark the permalink. Both comments and trackbacks are currently closed.